The development of free machining sintered metal including non-metal additives. 2nd report Sintered stainless steel.
نویسندگان
چکیده
منابع مشابه
Dry Sintered Metal Coating of Halloysite Nanotubes
Halloysite nanotubes (HNTs) are a naturally-occurring aluminosilicate whose dimensions measure microns in length and tens of nanometers in diameter. Bonding defects between the alumina and silica lead to net negative and positive charges on the exterior and interior lumen, respectively. HNTs have been shown to enhance the material properties of polymer matrices and enable the sustained release ...
متن کاملEmissions from a Diesel Engine using Fe-based Fuel Additives and a Sintered Metal Filtration System.
A series of laboratory tests were conducted to assess the effects of Fe-containing fuel additives on aerosols emitted by a diesel engine retrofitted with a sintered metal filter (SMF) system. Emission measurements performed upstream and downstream of the SMF system were compared, for cases when the engine was fueled with neat ultralow sulfur diesel (ULSD) and with ULSD treated with two formulat...
متن کاملMetal functionalization of carbon nanotubes for enhanced sintered powder wicks
Phase change cooling schemes involving passive heat spreading devices, such as heat pipes and vapor chambers, are widely adopted for thermal management of high heat-flux technologies. In this study, carbon nanotubes (CNTs) are fabricated on a 200 lm thick sintered copper powder wick layer using microwave plasma enhanced chemical vapor deposition technique. A physical vapor deposition process is...
متن کاملSintered feldspathic and leucite reinforced ceramic are used for the fabrication of metal-free restorations
New ceramic materials, like hot-pressed glass ceramics can be used to achieve monolithic full anatomic all-ceramic dental restorations even in the molar areas. Due to the fact that these materials are brittle and susceptible to fracture, the aim of the study was to reveal the fracture behaviour of hot-pressed glass ceramic molar crowns under different loading methods. For the experimental analy...
متن کاملCrystallography of Widmanstätten austenite in duplex stainless steel weld metal
Two kinds of austenite grow from d-ferrite during the cooling of the duplex stainless steel weld deposits studied here, Widmanstätten plates and allotriomorphs which precipitate at d–d grain boundaries. It is found using microtexture measurements that the preferred crystallographic orientation of the Widmanstätten austenite can be estimated using established theory if it is assumed that there i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
سال: 1987
ISSN: 0387-5024,1884-8354
DOI: 10.1299/kikaic.53.243