The Brittleness Of Zn-Cu-Ti Sheet Alloys

Corrosion Characteristics of a - Ti and Ti 2 Cu Composing Ti - Cu Alloys

A series ef binary Ti-Cu alloys containing 5-20 mass% Cu was prepared, and the corresien behavior of a-Ti and Ti2Cu composing the Ti-Cu alloys were examined based on the anodic polarization curves and released iens in O.9% NaCl and 1% lactic acid solutions. In both selutions, the Ti-Cu alloys showed the same anodic polarization curves as titanium in the conditien below 1.4 V. Hewever, precipita...

Machinability of Experimental Ti-Cu Alloys

This study is an investigation of the machinability of experimental Ti-Cu alloys (2, 5, and 10mass% Cu) as new dental titanium alloy candidates for CAD/CAM use. The alloys were slotted with a vertical milling machine and carbide square end mills under two cutting conditions. Their machinability was evaluated through cutting force using a three-component force transducer fixed on the table of th...

ANELASTIC EFFECTS IN SINGLE CRYSTALS OF -Cu-Zn AND -Cu-Zn-Al ALLOYS

Electrodeposition of Zn, Cu, and Zn-Cu Alloys from Deep Eutectic Solvents

Deep eutectic solvents (DESs) comprising choline chloride (ChCl) with either urea or ethylene glycol (EG) have been successfully used as powerful and potential electrolytes for extracting metals from their corresponding metal oxide precursors. In this work, for electrodeposition of Zn and Zn-Cu alloys, ChCl/urea-based DES was employed. Cyclic voltammetry study demonstrates that the reduction of...

Thermodynamic and experimental study of Ti-Ag-Cu alloys

Phase equilibria in the ternary Ti-Ag-Cu system have been studied thermodynamically and experimentally at various temperatures. The thermodynamic analysis was performed by combining the most recent data on the binary Ag-Cu, Ti-Ag and Ti-Cu systems and experimental information obtained by the diffusion couple technique. The eutectic and three noneutectic binary Ag-Cu alloys were melted and annea...