The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac
نویسندگان
چکیده
منابع مشابه
Diagnostics for a 1.2 kA, 1 MeV, Electron Induction Injector
We are constructing a 1.2 kA, 1 MeV, electron induction injector as part of the RTA program, a collaborative effort between LLNL and LBNL to develop relativistic klystrons for Two-Beam Accelerator applications. The RTA injector will also be used in the development of a high-gradient, low-emittance, electron source and beam diagnostics for the second axis of the Dual Axis Radiographic Hydrodynam...
متن کاملBEAM QUALITY MEASUREMENT OF 100-MeV TEST LINAC
The 100-MeV Test Linac was constructed for the high brightness applications such as free electron lasers and coherent radiation generation experiments at PAL. The linac consists of a thermionic RF-gun, an alpha magnet, two accelerating structures, and a beam analysing magnet. The RF-gun is a one-cell cavity with a tungsten dispenser cathode of 3-mm diameter, and the longitudinal matching from t...
متن کاملA 50-MHz, 12-MW INDUCTION LINAC CURRENT MODULATOR
This paper describes a scheme to control the intrapulse energy variations of long pulse bursts of an induction linac. Analog control over the electron beam injector current is exercised in such a way that accelerator beam load variations compensate for thermal impedance variations of the accelerator cell ferrites. Circuit topology and test data are presented. The circuit uses 64 planar triodes ...
متن کاملPulsed Neutron Source Using 100-mev Electron Linac at Pohang Accelerator Laboratory
The Pohang Accelerator Laboratory operates an electron linac for a pulsed neutron source as one of the long-term nuclear R&D programs at the Korea Atomic Energy Research Institute. The designed beam parameters are as follows; The nominal beam energy is 100 MeV, the maximum beam power is 10 kW, and the beam current is varied from 300 mA to 5A depends on the pulse repetition rate. The linac has t...
متن کاملLinear Induction Accelerator Approach for Advanced Radiography
Recent advances in induction accelerator technology make it possible to envision a single accelerator that can serve as an intense, precision multiple pulse x-ray source for advanced radiography. Through the use of solid-state modulator technology repetition rates on the order of 1 MHz can be achieved with beam pulse lengths ranging from 200 ns to 2 μsecs. By using fast kickers, these pulses ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1983
ISSN: 0018-9499
DOI: 10.1109/tns.1983.4336542