Texture evolution of 01570 aluminum alloy sheet
نویسندگان
چکیده
منابع مشابه
Evolution of Strain-Induced Microstructure and Texture in Commercial Aluminum Sheet under Balanced Biaxial Stretching
The evolution of surface topography and crystallographic texture was investigated under balanced biaxial stretching in sheets of the aluminum alloy 5052-H32. Two different lots of material, with an initial nominal thickness of 1 mm, were tested in the as-received condition. Samples with increasing levels of balanced biaxial strain were deformed using a modified Marciniak in-plane stretching tes...
متن کاملEffect of Processing Methods on Texture Evolution in AZ31 Mg Alloy Sheet
Textures of AZ31 Mg alloy sheets were evaluated by using neutron diffraction method in this study. The AZ31 sheets were fabricated either by conventional casting and subsequent hot rolling or strip casting. The effect of warm rolling was investigated using the AZ31 Mg alloy sheet produced by conventional casting. Warm rolling of 30% thickness reduction per pass was possible without any side-cra...
متن کاملTexture Evolution in Continuous Casting AA5052 Aluminum Alloy Hot Band During Equi-Biaxial Stretching
In this study, the global texture evolution in a 2 mm gauge hot band of continuous casting AA5052 aluminum alloy, annealed at 449 °C for 4 hours, was investigated. Samples were deformed to three different strain values under a near equi-biaxial stretching condition. Their textures were. The major and minor strains of these samples were measured using an automatic strain analysis system. The tex...
متن کاملStatistical analysis on static recrystallization texture evolution in cold-rolled AZ31 magnesium alloy sheet.
Cast AZ31B-H24 magnesium alloy, comprising Mg with 3.27 wt% Al and 0.96 wt% Zn, was cold rolled and subsequently annealed. Global texture evolutions in the specimens were observed by X-ray diffractometry after the thermomechanical processing. Image-based microstructure and texture for the deformed, recrystallized, and grown grains were observed by electron backscattered diffractometry. Recrysta...
متن کاملTexture Correlation Representation Methods: Application to 6022 Aluminum Sheet
Two new graphical methods are presented for microstructural analysis of crystalline material. These analyses are intended to aid an understanding of deformation behavior at scales larger than the grain size. The correlation of orientation over large distances has rarely been investigated since long-range correlation has been assumed to be negligible, if present at all. The first method reveals ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/170/1/012013