Tensile strength of polyester resin reinforced sugarcane bagasse fibers modified by estherification
نویسندگان
چکیده
منابع مشابه
Tensile strength and impact strength of color modified acrylic resin reinforced with titanium dioxide nanoparticles
BACKGROUND Poor mechanical properties are among the main limitations of acrylic resins. Addition of titanium dioxide (TiO2) nanoparticles to acrylic resin has been shown to improve its mechanical properties with an adverse effect on its color. Thus, this study sought to assess the tensile and impact strength of a color modified heat cure acrylic resin reinforced with TiO2 nanoparticles. MATER...
متن کاملEffect of Strain Rate on the Tensile Failure of Woven Reinforced Polyester Resin Composites
Tensile stress-strain curves a r e obtained at s t rain rates of %lo-'+, ~ 1 0 and c1000/s for carbon, Kevlar and glass fibre woven-reinforced polyester resin compos i tes and the variation of modulus, tensile strength and fracture strain with strain rate is determined. A change in the failure mode at the highest strain rates is observed for the glass but not the carbon or Kevlar reinforced com...
متن کاملImprovement of Strength Parameters of Sand Reinforced with Polymeric Fibers
Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...
متن کاملEffect of Sugarcane Bagasse Ash on Strength Properties of Concrete
The present study focuses on the utilization of Sugarcane Bagasse Ash as replacement material for cement in concrete production. Sugarcane Bagasse ash contains high amorphous silica content and aluminium ion. For experimental investigations, Sugarcane bagasse ash and its chemical properties are obtained from KCP sugar factory, Andhra Pradesh. Ordinary Portland cement was partly replaced by suga...
متن کاملTensile Strength Characteristics of Polypropylene Composites Reinforced with Stone Groundwood Fibers from Softwood
The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.04.387