Tensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid Composite
نویسندگان
چکیده
منابع مشابه
Effect of Moisture Absorption on the Tensile Behavior of Woven Hybrid Natural Fiber Reinforced Polymer Composites
Natural fibers are receiving considerable attention as substitutes for synthetic fiber reinforcements such as glass in polymer due to their low density, low cost, acceptable specific strength, reduced tool wear and respiratory irritation and renewable resources. The fibers are not uniformly distributed in the randomly oriented fiber reinforced hybrid composites due to manual lay-up and fibers a...
متن کاملExperimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite
Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...
متن کاملTensile properties and damage evolution in vascular 3D woven glass/epoxy composites
Vascularization enables multifunctional composites capable of self-healing, thermal regulation, electrical and magnetic modulation, and damage sensing. In this study, the effect of vascular channels on the in-plane tensile properties and damage progression of three-dimensional orthogonally woven textile composites is examined. Vascular channels are manufactured by Vaporization of Sacrificial Co...
متن کاملMulti-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft
In design and fabricate drive shafts with high value of fundamental natural frequency that represented high value of critical speed; using composite materials instead of typical metallic materials could provide longer length shafts with lighter weight. In this paper, multi-objective optimization (MOP) of a composite drive shaft is performed considering three conflicting objectives: fundamental ...
متن کاملBuckling Analysis of Woven Glass Epoxy Laminated Composite Plate
Buckling behavior of laminated composite plates subjected to in-plane loads is an important consideration in the preliminary design of aircraft components. The sizing of many structural subcomponents of the aircraft structures is often determined by stability constraints. The objective of the current study is to understand the influence of the length-to-thickness ratio, the aspect ratio, the fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science Forum
سال: 2017
ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/msf.890.20