Tensile Properties of Sintered Ti-4%Fe Alloy Compacts by Injection Moldings.
نویسندگان
چکیده
منابع مشابه
Influence of composition and purity on tensile properties of Ni-Ti alloy castings.
The influence of composition and purity of titanium on the mechanical properties and the transformation temperatures of Ni-Ti alloy dental castings was investigated by tensile testing and differential scanning calorimetry (DSC). The compositions of the ingots were 49.0-49.2 at% of titanium content. Three grades of titanium of relatively high purity were used as starting materials. The result sh...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولThermal Mechanical Processing Effects on Microstructure Evolution and Mechanical Properties of the Sintered Ti-22Al-25Nb Alloy
This work illustrates the effect of thermal mechanical processing parameters on the microstructure and mechanical properties of the Ti-22Al-25Nb alloy prepared by reactive sintering with element powders, consisting of O, B2 and Ti₃Al phases. Tensile and plane strain fracture toughness tests were carried out at room temperature to understand the mechanical behavior of the alloys and its correlat...
متن کاملEffect of Molten Pool Size on Microstructure and Tensile Properties of Wire Arc Additive Manufacturing of Ti-6Al-4V Alloy
Wire arc additive manufacturing (WAAM) technique is a cost-competitive and efficient technology to produce large structure components in industry domains. Mechanical properties are mainly dominated by the microstructure of the components, which is deeply affected by the molten pool size. In this work, to investigate the effect of the molten pool size on microstructure and mechanical properties ...
متن کاملThe 4 K Tensile and Fracture Toughness Properties of a Modified 316LN Conduit Alloy
The 45-T Hybrid magnet will employ Cable-In-Conduit Conductor (CICC) technology for the windings of the Nb3Sn and NbTi coils. The conduit steel must retain high strength and fracture toughness at 4 K, following the Nb3Sn reaction heat treatment. The design requirements call for a 4 K yield strength exceeding 1000 MPa and a 4 K fracture toughness (KIc) greater than 110 MPa m -0.5. We report the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1995
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.42.1052