Tensile Properties of Molybdenum “Composite-Cast” with Nimonic 90 Alloy
نویسندگان
چکیده
منابع مشابه
Corrosion Behaviour of NIMONIC-90 Alloy
Investigations were conducted on hot corrosion of Nickel base, NIMONIC-90 at 675°C and 725°C. The tests were carried out on small test coupons coated with a chemical containing Sodium sulphate and Sodium Vanadate which is representative of the corrosive deposit that usually forms during service in the coal fired boiler and the likes operating in marine atmospheres. Corrosion rates were measured...
متن کاملMicrostructure, Tensile and Creep Properties of Ta20Nb20Hf20Zr20Ti20 High Entropy Alloy
This paper examines the microstructure and mechanical properties of Ta20Nb20Hf20Zr20Ti20. Two casting processes, namely, gravity casting and suction-assisted casting, were applied, both followed by Hot Isostatic Pressing (HIP). The aim of the current study was to investigate the creep and tensile properties of the material, since the literature review revealed no data whatsoever regarding these...
متن کاملEFFECTS OF HOT ISOSTATIC PRESSING ON THE TENSILE PROPERTIES OF A356 CAST ALLOY
The influences of age hardening and HIP (Hot Isostatic Pressing) on the mechanical properties of A356 (Al 7Si 0.6 Mg) casting alloys were studied. Cast bars were homogenized, heated and maintained at a temperature of 540°C for a duration of 2 hours, followed by rapid cooling in a polymeric solution. The castings were age hardened at 180°C for a duration of 4 hours before being subjected to HIP ...
متن کاملNanostructured high-strength molybdenum alloys with unprecedented tensile ductility.
The high-temperature stability and mechanical properties of refractory molybdenum alloys are highly desirable for a wide range of critical applications. However, a long-standing problem for these alloys is that they suffer from low ductility and limited formability. Here we report a nanostructuring strategy that achieves Mo alloys with yield strength over 800 MPa and tensile elongation as large...
متن کاملEffect of Microstructural Variations on the Tensile and Fracture Toughness Properties of Alloy 718 Welds
The effect of microstructural variations on the tensile and fracture toughness properties of Alloy 718 welds is reviewed. The microstructural parameters surveyed include heat treatment, longterm thermal aging and neutron irradiation. The two heat treatments that were characterized include the conventional heat treatment, per ASTM B637, and a modified heat treatment designed to improve the tough...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1975
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.39.1_77