Tensile properties of Al/CFRP multi layered hybrid composite materials.

Properties of Composite Materials

strength, flexural modulus, and contraction stress of one orthodontic composite and two flowable composites. Orthodontic brackets were bonded to 45 human maxillary premolars with the composites Transbond XT, Filtek Z-350 flow and Opallis flow and tested for shear bond strength. For measurement of flexural strength and flexural modulus, specimens were fabricated and tested under flexion. For the...

Revealing extraordinary tensile plasticity in layered Ti-Al metal composite

Layered Ti-Al metal composite (LMC) fabricated by hot-pressing and hot-rolling process displays higher ductility than that of both components. In this paper, a combination of digital image correlation (DIC) and X-ray tomography revealed that strain delocalization and constrained crack distribution are the origin of extraordinary tensile ductility. Strain delocalization was derived from the tran...

Effect of Particle Volume Fraction on the Tensile Properties of Composite Al6061/SiC Materials by Hot Extrusion

In the present study the effect of phase volume fraction on the reinforcement of microstructure and tensile properties of composite extrusion process Al6061/SiC has been studied. For this purpose, the base alloy Al6061 using pure aluminum ingots, silicon, of Al-50% Mg, Al-10% Cr and a thin copper rod was prepared. Next, the composite Al6061/5% SiC, Al6061/10% SiC, Al6061/15% SiC and Al6061/20% ...

Multi-Scale Approach to Investigate the Tensile and Fracture Behavior of Nano Composite Materials

The Characterization of Defects in Multi-Layered Composite Materials by Thermal Tomography Methods

The idea of thermal tomography is slicing a work piece for some in-depth layers which exhibit the distribution of thermal properties in materials by the analogy with X-ray tomography. Thermal tomography is based on the analysis of the surface temperature evolution which follows thermal stimulation of test samples. In this paper, some experimental results of applying the dynamic thermal tomograp...