Tempering stability of retained austenite in nanostructured dual phase steels
نویسندگان
چکیده
منابع مشابه
Mechanical Stability of Retained Austenite in the Nanostructured, Carbide Free Bainitic Steels During Tensile Testing and Cold Rolling Process
Terms of service of the steels with retained austenite in the microstructure, is severely depended on the stability of austenite during the course of deformation. The present work aims to evaluate the mechanical stability of austenite in nanostructured, carbide free bainitic steels during tensile testing and cold rolling process. To achieve the microstructure with retained austenite, the steel ...
متن کاملTensile Ductility of Nanostructured Bainitic Steels: Influence of Retained Austenite Stability
High silicon (>1.5%) steels with different compositions were isothermally transformed to bainite at 220 and 250 ◦C to produce what is often referred to as nanostructured bainite. Interrupted tensile tests were carried out and the retained austenite was measured as a function of strain. Results were correlated with tensile ductility. The role of retained austenite stability is remarkably underli...
متن کاملCharacterization of individual retained austenite grains and their stability in low-alloyed TRIP steels
In situ three-dimensional (3-D) X-ray diffraction experiments have been performed at a synchrotron source on low-alloyed multiphase TRIP steels containing 0.25 wt.% Si and 0.44 wt.% Al and produced with different bainitic holding times, in order to assess the influence of the bainitic transformation on the thermal stability of individual austenite grains with respect to their martensitic transf...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملFormation of Nanostructured Steels by Phase Transformation
A thermodynamic criterion is developed to define the finest grain size that can be achieved during phase transformation, as a function of the driving force, interfacial energies and the parent phase grain size. It is found that at large undercoolings below the equilibrium temperature, the grain size achieved in practice is far greater than predicted theoretically. This is because of the heat of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Technology
سال: 2013
ISSN: 0267-0836,1743-2847
DOI: 10.1179/1743284713y.0000000227