Temperature-stable Barium Titanate Ceramics Containing Niobium Pentoxide
نویسندگان
چکیده
منابع مشابه
Synthesis of Barium-zinc-titanate Ceramics
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...
متن کاملBarium titanate as a ferroelectric and piezoelectric ceramics
Barium titanate is a member of a large family of compounds with the general formula ABO3 called perovskites, as the crystal size of barium titanate increases and at critical crystalline size crystal structure of barium titanate transformed from cubic to tetragonal. Transformation of crystal structure is also take place at Curi temperature. Cubic structure show paramagenatic behavior while tetra...
متن کاملUnfolding grain size effects in barium titanate ferroelectric ceramics
Grain size effects on the physical properties of polycrystalline ferroelectrics have been extensively studied for decades; however there are still major controversies regarding the dependence of the piezoelectric and ferroelectric properties on the grain size. Dense BaTiO3 ceramics with different grain sizes were fabricated by either conventional sintering or spark plasma sintering using micro-...
متن کاملDc and Ac Electrical Properties of Ptc Barium Titanate Ceramics
The dc and ac electrical properties of PTC barium titanate ceramics were measured in the temperature range from 30 to 450°C. The Heywang's model alone is not sufficient to perform a quantitative analysis of the results. The heterogeneity of the system is taken into account.
متن کاملA. Response of Lead Zirconate Titanate Ceramics to Temperature Fluctuations
It has been found that some shapes of lead zirconate titanate (PZT) ceramics respond to rapid temperature fluctuations when mounted in a particular geometrical configuration. This effect is presumably caused by thermal stresses in the crystal which produce a voltage difference across the silvered surfaces. These units were originally constructed to serve as pressure transducers in a lowpressure...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ElectroComponent Science and Technology
سال: 1976
ISSN: 0305-3091
DOI: 10.1155/apec.2.241