Technical and Environmental Study on Using Light Fuel Oil and Crude Oil in Internal Combustion Engines (ICE)

Accurate Simulation of Low-Pressure Port Fuel and Water Spray in Internal Combustion Engines; Numerical and Experimental Study

One of the solutions to reduce pollutants and increase engine power is to use water spray in internal combustion engines. In this type of engine, fuel and water sprays play an important role in engine performance. In this regard, the purpose of this study is to accurately simulate fuel and water sprays and provide optimal coefficients to achieve the best simulation results. For this purpose, th...

Study on Combustion Property of Crude Oil - a Joint Study between Nist / Cfr and Fri -

In order to understand the combustion properties of crude oi I pool fires. an experimental study was done in Fire Research lnstitute(FRI) large scale test faci I ity. The radiative output, burning rate, and the concentrations of CO, CO 2 , and smoke (above the flame tip) were measured during the burn­ ing of Arabian I ight crude oi I. Several different size tanks were used to study the scale ef...

Oil Quality in Diesel Engines With On Line Oil Cleaning Using a Heated Lubricating Oil Recycler

بوزدایی از ‏‎fuel oil deodorization of fuel oil‎‏

مطالعات و بررسی های انجام گرفته نشان می دهد ترکیبات بودار موجود در ‏‎fuel oil‎‏ عمدتا ترکیبات سولفوردار سخت مثل تیوفن، دی متیل بنزوتیوفن و ... بوده و روشهای بوزدایی همچون استخراج با حلالهای اسیدی و بازی ، رقیق کاری با گازولین ، ماسکینگ با بوتیل استات نتایج چندان مطلوبی در بوزدایی از آن نشان نمی دهند.همچنین روش جذب سطحی برای بوزدایی ‏‎fuel oil‎‏ تنها با استفاده از جاذب هایی همچون بنتونیت و توفیت...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...