Synthesis, Mechanical, and Tribological Performance Analysis of Stir-Casted AA7079: ZrO2 + Si3N4 Hybrid Composites by Taguchi Route

Electrical and Mechanical Performance of Hybrid and Non-hybrid Composites

This paper investigated the moisture absorption, mechanical behavior and the dielectric performance of hybrid and non-hybrid polymeric composites. Hand lay-up technique was used for processing carbon; glass reinforced polyester resin composites (non-hybrid) and carbon-glass/polyester hybrid composites with various fiber configurations. The maximum resistance of water absorption was obtained for...

Tribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites

Tribological performance of the hot-pressed pure Al2O3 and its composites containing various hybrid contents of graphene nanoplatelets (GNPs) and carbon nanotubes (CNTs) were investigated under different loading conditions using the ball-on-disc method. Benchmarked against the pure Al2O3, the composite reinforced with a 0.5 wt% GNP exhibited a 23% reduction in the friction coefficient along wit...

Tribological Behavior and Mechanical Properties of Graphene/PEEK Composites

PEEK has been implemented in various orthopaedic applications due to its many beneficial mechanical, tribological, and radiolucent properties. These properties can be further tailored by introducing fillers into the PEEK matrix. In this work, graphene has been incorporated due to its high mechanical resistance, intrinsic stiffness, and lubricating properties [2].

Mechanical Properties of SiC Fiber- Reinforced Reaction-Bonded Si3N4 Composites

A comparison study of polymer/cobalt ferrite nano-composites synthesized by mechanical alloying route

In this research, the effect of different biopolymers such as polyethylene glycol (PEG) and polyvinylalcohol (PVA) on synthesis and characterization of polymer/cobalt ferrite (CF) nano-composites bymechanical alloying method has been systematically investigated. The structural, morphological andmagnetic properties changes during mechanical milling were investigated by X-ray diffraction (XRD),Fo...