Suppression of Cross-Polarization of the Microstrip Integrated Balun-Fed Printed Dipole Antenna
نویسندگان
چکیده
منابع مشابه
Dual wideband printed dipole antenna with integrated balun
A printed dipole antenna with integrated balun is presented. The radiating structure is a two-element dipole with resonances at 900 and 1700 MHz, with the balun providing one extra resonance at each band. By co-designing the radiating element with a Marchand balun modified for dual-band operation, an antenna covering the cellular bands 824–960 and 1710–2170 MHz has been achieved. Measurements o...
متن کاملDual-Band Loop-Loaded Printed Dipole Antenna with a Wideband Microstrip Balun Structure
─ A novel loop-loaded printed dipole (LLPD) with a wideband balun structure is presented for aiming a dual-band antenna operation at 3.0/5.5 GHz bands. The proposed balun structure alone demonstrates VSWR<1.5 performance over a 3:1 bandwidth. As the loop elements placed on the antenna aperture provides dual-band operation with at least 15% impedance bandwidths, the wideband balun/feed allows fo...
متن کاملDual-band and Wideband Design of a Printed Dipole Antenna Integrated with Dual-band Balun
A dual-band printed dipole antenna with integrated balun feed is given in this paper. First, the fork-shaped slot is etched on the arms of the printed dipole antenna to achieve the dual-band operation with resonances at WLAN bands. The radiating element without balun is optimized and operates at 2.4 GHz (2180–2750MHz) and 5.2GHz (5040 MHz–5480MHz) where return loss is less than −10 dB. In order...
متن کاملWideband Microstrip-fed Printed Bow-tie Antenna for Phasedarray Systems
A micro strip-fed printed bow-tie antenna is presented inorder to achieve wide bandwidth, high gain, and size reduction. A comparisonbetween the bow-tie and the quasi-Yagi (dipole and director)antennas shows that the bow-tie antenna has a wider bandwidth, highergain, lower front-to-back ratio, lower crosspolarization level, andsmaller size. Two-element arrays are designed and their characterist...
متن کاملPrinted Tem Horn Antenna Fed by Balanced Microstrip Line
Abstract—In this paper, a new kind of printed TEM horn antenna with high-gain fed by balanced microstrip line is proposed. The radiation part of the antenna (printed on the FR4 epoxy substrate) is composed of two symmetrical triangular metal foil branches fed by balanced microstrip line. The antenna has been simulated by CST MICROWAVE STUDIOr software and the simulated results show that the pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Antennas and Propagation
سال: 2014
ISSN: 1687-5869,1687-5877
DOI: 10.1155/2014/765891