Superplasticity in silicon nitride whisker reinforced 2124 aluminum alloy composite.

Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites

Fatigue crack growth is examined in P/M 2124 aluminum alloys reinforced with SiC particles (SiCp) and whiskers (SiCw) over a wide spectrum of growth rates from 10 to 10 m per cycle. Effects of aging treatment, orientation of crack growth direction with respect to the rolling direction, mean stress (or stress ratio), and reinforcement volume percent on the fatigue crack growth threshold are inve...

Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds.

The apparent mechanical properties of hydroxyapatite (HA) whisker reinforced polyetherketoneketone (PEKK) scaffolds were evaluated in unconfined, uniaxial compression to investigate the effects of the porosity (75%, 82.5% and 90%), HA content (0, 20 and 40 vol%) and mold temperature (350, 365 and 375 ( composite function)C). Increased porosity resulted in a non-linear decrease in the elastic mo...

Fabrication of Aluminum Matrix Composite Reinforced by Silicon Carbide of Various Micro-structures

The Correlation between Grain Boundary Character and Intergranular Corrosion Susceptibility of 2124 Aluminum Alloy

The effects of grain boundary character on the intergranular corrosion susceptibility of 2124 aluminum alloy were examined. In the study, the alloy was heat treated at 540oC and corrosion tested according to ASTM G110 standards. After obtaining grain orientations from the automated Electron Back-Scatter Diffraction (EBSD), both grain boundary character and grain boundary plane distributions wer...

Enhanced superplasticity in commercially pure titanium alloy

The superplasticity of commercially pure titanium alloy at high temperature was studied and the dynamic recrystallization phenomenon of the alloy was investigated by using electron back scattered diffraction. A two-step deformation method was used to increase the ductility of the alloy from 188% to 243%. 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.