Superplasticity in a dilute zinc-aluminum alloy
نویسندگان
چکیده
منابع مشابه
Enhanced superplasticity in commercially pure titanium alloy
The superplasticity of commercially pure titanium alloy at high temperature was studied and the dynamic recrystallization phenomenon of the alloy was investigated by using electron back scattered diffraction. A two-step deformation method was used to increase the ductility of the alloy from 188% to 243%. 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
متن کاملGap States in Dilute Magnetic Alloy Superconductors.
We study states in the superconducting gap induced by magnetic impurities using self-consistent quantum Monte Carlo with maximum entropy and formally exact analytic continuation methods. The magnetic impurity susceptibility has different characteristics for T0 & Tc0 and T0 * Tc0 (T0: Kondo temperature; Tc0: superconducting transition temperature) due to the crossover between a doublet and a sin...
متن کاملPorosity Prediction in Aluminum A356 Alloy Castings
A comprehensive methodology that takes into account alloy solidification, shrinkage-driven interdendritic fluid flow, hydrogen precipitation, and porosity evolution has been developed for the prediction of microporosity fraction in aluminum A356 alloy castings. The mathematical models presented are implemented in a computational framework consistent with those of commercial casting codes, allow...
متن کاملAchieving superplasticity in a Bi-Sn alloy processed by equal- channel angular pressing
Equal-channel angular pressing (ECAP) was utilized to process a Bi‒42Sn eutectic alloy at room temperature using processing route A for 1, 2, 4, and 8 passes. Tensile testing was performed at room temperature under initial strain rates in the range of 1.0 × 10 -5 to 1.0 × 10 -2 s -1 . The results demonstrate that processing by ECAP improves the ductility in this material and the elongations to ...
متن کاملSuperplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation
The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scripta Metallurgica
سال: 1968
ISSN: 0036-9748
DOI: 10.1016/0036-9748(68)90179-8