Study on wear behaviour characteristics of ZrO2 and ZrN coated AZ91D Mg alloy
نویسندگان
چکیده
The as received AZ91D Mg alloy was coated by ZrO2 and ZrN ceramic using Physical Vapour Deposition (PVD) process. dry sliding wear studies were carried out in a pin-on-disc tester at speed of 2-8 m/s normal loads 2- 10 N. mechanism such abrasive, delamination, thermal softening oxidation observed. results showed that the PVD coating increased resistance alloy. worn surface examined Scanning Electron Microscope (SEM).
منابع مشابه
Microstructure and Aging Behavior of Nonflammable AZ91D Mg Alloy
Phase equilibria of AZ91D Mg alloys for nonflammable use, containing Ca and Y, were carried out by using FactSage® and FTLite database, which revealed that solid solution treatment could be performed at temperatures from 400 to 450C. Solid solution treatment of AZ91D Mg alloy without Ca and Y was successfully conducted at 420C and supersaturated microstructure with all beta phase resolved into ...
متن کاملEffect of heat treatment on corrosion and electrochemical behaviour of AZ91D magnesium alloy
An AZ91D ingot in the as-cast condition was homogenized by solution treatment and then aged for various periods of time. The microstructures produced were studied in detail and the b phase volume fraction was measured quantitatively. The Corrosion resistance of all the different microstructures was studied in 3.5% NaCl solution through weight loss measurement in constant immersion conditions an...
متن کاملEffect of Ultrasonic Treatment in the Static and Dynamic Mechanical Behavior of AZ91D Mg Alloy
The present study evaluates the effect of high-intensity ultrasound (US) in the static and dynamic mechanical behavior of AZ91D by microstructural modification. The characterization of samples revealed that US treatment promoted the refinement of dendrite cell size, reduced the thickness, and changed the β-Mg17Al12 intermetallic phase to a globular shape, promoted its uniform distribution along...
متن کاملEffects of Plasma ZrN Metallurgy and Shot Peening Duplex Treatment on Fretting Wear and Fretting Fatigue Behavior of Ti6Al4V Alloy
A metallurgical zirconium nitride (ZrN) layer was fabricated using glow metallurgy using nitriding with zirconiuming prior treatment of the Ti6Al4V alloy. The microstructure, composition and microhardness of the corresponding layer were studied. The influence of this treatment on fretting wear (FW) and fretting fatigue (FF) behavior of the Ti6Al4V alloy was studied. The composite layer consiste...
متن کاملHeat Treatment of AZ91D Mg-Al-Zn Alloy: Microstructural Evolution and Dynamic Response
Magnesium alloys are attracting great interest from the automotive industry because of the potential for weight reduction. An AZ91D cast alloy was studied in the current work to understand the effect of heat treatment on the microstructure and dynamic compressive properties. The selected heat treatments include solution treatment (T4) and solution treatment followed by aging (T6). The as-cast a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mining and Metallurgy, Section B
سال: 2023
ISSN: ['1450-5339', '2217-7175']
DOI: https://doi.org/10.2298/jmmb230323024a