Study on the Quality of Gardella Fine Yarn in Comparison to Modified Ring Spinning Frame Fine Yarn

A Statistical Analysis of Yarn Breakage on Spinning Frame

The problem of yarn breakage during spinning is quite serious, but it is difficult to predict the number of yarn breakages, because the tension and strength of the yarn always vary. The author has used simple mathematical models of the variation of the tension and the strength of the yarn, and calculated the probability of yarn breakages. The result has shown that the variation of the yarn stre...

YARN: Spinning-in-Progress

YARN (Yet Another RussNet), a project started in 2013, aims at creating a large open WordNet-like thesaurus for Russian by means of crowdsourcing. The first stage of the project was to create noun synsets. Currently, the resource comprises 100K+ word entries and 46K+ synsets. More than 200 people have taken part in assembling synsets throughout the project. The paper describes the linguistic, t...

Distribution of Power Requirements during Yarn Winding in Ring Spinning

Production of Core Spun Yarn with Ring & Siro Spinning System

A common problem in production of core–spun yarns on the Ring spinning frame is the slippage of the staple fibers as sheath fibers relative to the core. This effect is known as ‘strip-back’ or barberpole. This problem may lead to an incomplete core coverage and results in end–breaks in subsequent processing. In order to avoid this problem, in the present work, core spun yarns (acrylic sheath fi...

A Study on Spinning Limits and Yarn Properties with Progressive Change in Yarn Count in Friction Spinning

The spinning limit for three different fibres (cotton, viscose rayon and polyester) on a Dref-3 friction spinning machine has been investigated. The change in yarn properties with progressive change in count has also been reported. The count range has been seen to be dependent on fibre type. As one progresses from very coarse to fine counts, the yarn tensile property remain fairly unaltered for...