Study on Rotating Bending Fatigue Characteristic of Several Stainless Steels at High Temperature
نویسندگان
چکیده
منابع مشابه
High-temperature Fatigue Crack Growth Behavior of 17-4 Ph Stainless Steels
The fatigue crack growth (FCG) behavior was investigated for 17-4 PH stainless steels in three heat-treated conditions, i.e., unaged (Condition A), peak-aged (Condition H900), and overaged (Condition H1150), at temperatures ranging from 300 to 500 C. The high-temperature fatigue crack growth rates (FCGRs) of Condition H1150 were increased with an increase in temperature. However, for Conditions...
متن کاملCharacterization of Austenitic Stainless Steels Deformed at Elevated Temperature
Highly alloyed austenitic stainless steels are promising candidates to replace more expensive nickel-based alloys within the energy-producing industry. The present study investigates the deformation mechanisms by microstructural characterization, mechanical properties and stress–strain response of three commercial austenitic stainless steels and two commercial nickel-based alloys using uniaxial...
متن کاملLow-Temperature Carburization of Austenitic Stainless Steels
LOW-TEMPERATURE CARBURIZATION is a gaseous carburization process performed at atmospheric pressure, at temperatures where the kinetics of substitutional diffusion are very slow. Low-temperature carburization hardens the surface of austenitic stainless steels through the diffusion of interstitial carbon, without the formation of carbides. The surface must be activated, by modification and remova...
متن کاملCharacteristic Points of Stress-Strain Curve at High Temperature
Determination of critical points on hot stress-strain curve of metals is crucial in thermo-mechanical processes design. In this investigation a mathematical modeling is given to illustrate the behavior of metal during hot deformation processes such as hot rolling. The critical strain for the onset of dynamic recrystallization has been obtained as a function of strain at the maximum stress. In a...
متن کاملTensile Tests on Stainless Steels in Temperature Range
In real conditions, austenitic stainless steels solidify in non equilibrium and a two phases microstructure of austenite and ferrite is formed 1 . The aim of this work was to investigate the behaviour of both phases at tensile testing, especially to find out an eventual difference in the relaxation of the deformation energy and the effect of the two phases microstructure in workability. To achi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 2006
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.72.114