Study on Printed Wiring Board Clad with Metal Core Oxide by Anodic Oxidation
نویسندگان
چکیده
منابع مشابه
Optical interconnect on printed wiring board
Integration of high-speed parallel optical interconnects into printed wiring boards (PWB) is studied. The aim is a hybrid optical–electrical board including both electrical wiring and embedded polymer waveguides. Robust optical coupling between the waveguide and the emitter/detector should be achieved by the use of automated pick-and-place assembly. Different coupling schemes were analyzed by c...
متن کاملThe state of the art in printed wiring board inspection
Automated visual inspection of printed wiring is providing research opportunities in completely utomated optical systems technology. This paper addresses device design considerations, articularly the important problem of turning an optical inspection device into a tool for lanufacturing process analysis and control.
متن کاملTitanium oxide nanotube arrays prepared by anodic oxidation
Titanium oxide nanotubes were fabricated by anodic oxidation of a pure titanium sheet in an aqueous solution containing 0.5 to 3.5 wt% hydrofluoric acid. These tubes are well aligned and organized into high-density uniform arrays. While the tops of the tubes are open, the bottoms of the tubes are closed, forming a barrier layer structure similar to that of porous alumina. The average tube diame...
متن کاملAg/Pt Core-Shell Nanoparticles on Graphene Nanocomposite for Effective Anodic Fuels Electro-oxidation
The nanocomposite consists of the Ag as a core and Pt as shell on the surface of graphene nanosheets (Ag/Pt-G) was synthesized with a simple method and used as a novel electrochemical platform for an efficient catalyst for oxidation of the ethanol, methanol and formic acid. The morphology and electrochemical properties of Ag/Pt-G nanocomposite were investigated by TEM, X-ray diffraction, and vo...
متن کاملImpact of printed wiring board coatings on the reliability of lead-free chip-scale package interconnections
When lead-free solder alloys mix with lead-free component and board metallizations during reflow soldering, the solder interconnections become multicomponent alloy systems whose microstructures cannot be predicted on the basis of the SnPb metallurgy. To better understand the influences of these microstructures on the reliability of lead-free electronics assemblies, SnAgCu-bumped components were...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Metal Finishing Society of Japan
سال: 1973
ISSN: 1884-3395,0026-0614
DOI: 10.4139/sfj1950.24.2