Study on Prediction of Tool Flank Wear by Means of Cutting Force Ratios (1st Report)
نویسندگان
چکیده
منابع مشابه
Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...
متن کاملEvaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملCharacterizations of cutting tool flank wear-land contact
Metal deposition at the tool flank wear-land during machining is a common phenomenon, especially in machining aluminum alloys and annealed teels. The cause of metal deposit has not been studied and the characteristics of the wear-land and deposit contact are not completely known. In his study, a turning test was conducted using tungsten carbide (WC) tools with pre-generated wear-land to machine...
متن کاملOptical Flank Wear Monitoring of Cutting Tools
An optoelectronic method for in situ monitoring of the flank wear of cutting tools is presented. The method is based on real time vision technology in which the tool is illuminated by the beam of a laser and the wear zone is visualized using a Vidicon camera. The image is converted into digital pixel data and processed, to detect the wear land width. Detailed aspects of the image processing pro...
متن کاملOptimization of cutting tool geometry based on flank wear – DoE, PSO and SAA approach
In this analysis, an attempt has been made to study the effects of included angle, hardness, rake angle, tool approach angle and nose radius of cutting inserts on flank wear with the surface roughness as constraint. The selected parameters are varied through three levels. A new parametric study without considering any kind of benchmark problems in this area is performed and methodology has been...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1985
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.51.2115