Study on Kinetics of Acid Leaching of Zinc Ferrite and Leaching of Zinc Ferrite Waste Material
نویسندگان
چکیده
منابع مشابه
Investigation of leaching kinetics of zinc from a low-grade ore in organic and inorganic acids
The leaching kinetics of a low-grade zinc oxide ore in different acid media was investigated with respect to the experimental variables including acid concentration, temperature, liquid to solid (L/S) ratio, and stirring speed. The results obtained showed that the leaching reagent concentration and the reaction temperature exerted significant effects on the extraction of zinc, whereas the L/S r...
متن کاملSynthesis and Characterization of Nickel Zinc Ferrite Nanoparticles
In this research nickel zinc ferrite nanoparticles with composition of Ni1-xZnxFe2O4 (where x=0, 0.3, 0.7, 1) were synthesized by a sol-gel method at 600 °C for 5 hours. The structure of nanoparticles was studied using X-ray diffraction pattern. The lattice parameter of ferrite nanoparticles was calculated and indicates lattice constant of nanoparticl...
متن کاملLeaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue
This paper reports on the recovery of zinc, cobalt and manganese by two-step leaching of zinc-plants purification residue with sulfuric acid. The residue, hot filter press cake (HFC), contains 14 % ZnO, 4.8 % Co3O4 and 22.9 % MnO. Effects of different parameters are determined and used to optimize the process. With acid to hot filter press cake (HFC) stoichiometry of 0.85, acid concentration of...
متن کاملLeaching of Zinc Oxide in Acidic Solution
Leaching mechanism of zinc oxide is important not only to understand zinc smelting process but also to develop of new zinc recycling process. Recycling of zinc is mainly done by treatment of electric arc furnace dust (EAF dust). In Japan pyro metallurgical process is enhanced for EAF dust treatment, however only zinc oxide can be recovered by pyro metallurgical process. Hydro metallurgical proc...
متن کاملRecycling of Cu powder from industrial sludge by combined acid leaching, chemical exchange and ferrite process.
A method in combination of acid leaching, chemical exchange and ferrite process was applied to recycle copper and confer higher chemical stability to the sludge generated from etching process in printed circuit board industry. Ninety-five percent copper could be recycled in the form of powder from the sludge. Moreover, not only the wastewater after chemical exchange can be treated to fulfill th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical Engineering
سال: 2017
ISSN: 2373-1478,2373-1486
DOI: 10.12677/meng.2017.41009