Study on Bainitic Transformation by Dilatometer and In Situ LSCM
نویسندگان
چکیده
منابع مشابه
Strong Bainitic Steels by Continuous Cooling Transformation
Using metallurgical models, three steels were designed to obtain carbide-free bainitic structures in the as-rolled condition. Experimental castings were hot-rolled in a pilot mill and their austenite decomposition kinetics were measured using dilatometry. Tensile and Charpy impact properties were measured and the microstructures were characterised using X-ray diffractometry, optical and scannin...
متن کاملa study on rate making and required reserves determination in reinsurance market: a simulation
reinsurance is widely recognized as an important instrument in the capital management of an insurance company as well as its risk management tool. this thesis is intended to determine premium rates for different types of reinsurance policies. also, given the fact that the reinsurance coverage of every company depends upon its reserves, so different types of reserves and the method of their calc...
Thermal Stability of Retained Austenite in Bainitic Steel: an in situ study
The tempering of two–phase mixtures of bainitic ferrite and carbon–enriched retained austenite has been investigated in an effort to separate the reactions that occur at elevated temperatures from any transformation during cooling to ambient conditions. It is demonstrated using synchrotron X–radiation measurements, that the residue of austenite left at the tempering temperature partly decompose...
متن کاملThe Effects of Cr and Al Addition on Transformation and Properties in Low-Carbon Bainitic Steels
Three low-carbon bainitic steels were designed to investigate the effects of Cr and Al addition on bainitic transformation, microstructures, and properties by metallographic method and dilatometry. The results show that compared with the base steel without Cr and Al addition, only Cr addition is effective for improving the strength of low-carbon bainitic steel by increasing the amount of bainit...
متن کاملThe Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering
The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. A number of irons of different compositions have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. Austenitising was carried out at different temperatures and holding times for a variety of experimental irons to achieve suff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12091534