Study of Nano-Stereolithography Using Evanescent Light (1st report)
نویسندگان
چکیده
منابع مشابه
synthesis of amido alkylnaphthols using nano-magnetic particles and surfactants
we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.
15 صفحه اولgradual erasure of subjectivity: a study of samuel beckett’s trilogy in the light of postmodernism
ساموئل بکت بیشتر از هر نویسنده دیگری در نیم? دوم قرن بیستم با گفتارش زمان? ما را به آستان? از هم پاشیدگی کشانده است، آستانه ای که در آن مدرنیته با سرانجام گریزان اما غیرقابل اجتناب خود مواجه می شود. در این تحقیق روی مفهوم فردیت و محو آن در دوران پسامدرن تاکید شده و در طی آن سعی شده است که فردیت مدرن و پسامدرن در رمان های سه گانه بکت بررسی گردد. تحقیق حاضر یک بررسی کتابخانه ای و کیفی بر روی سه ر...
15 صفحه اولEvanescent-Wave Gas Sensing Using an Integrated Thermal Light Source
The last years showed an increased request for miniaturised, CMOS-compatible gas detectors. In contrast to sensors utilizing metal-oxide chemical interfaces, optical strategies are potentially faster and more robust. Recently we demonstrated CO2 detection by evanescent-wave absorption in the mid-infrared using a combination of an external laser source and silicon waveguides based on CMOS techno...
متن کاملInvestigation into Nano-Stereolithography Process for Developing Next Generation Three-dimensional Nano/Micro-Devices
A nano-stereolithography (NSL) apparatus has been developed for fabrication of microstructures with the resolution of approximately 100 nm. In the NSL process, a complicated 3D structure can be fabricated by building layer by layer, so it does not require any sacrificial layer or any supporting structure. A laminated layer was fabricated by means of solidifying liquid-state monomers using twoph...
متن کاملA study of recoating in stereolithography
Recoating in a stereolithography apparatus (SLA) involves dipping the part being built into a vat containing liquid resin and sweeping a blade over the top of the part. There are two problems with the recoating operation in existing SLA systems. Firstly, the process is slow because the blade sweep speed is usually restricted to minimize disturbances to the resin surface and also because, after ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering, Contributed Papers
سال: 2006
ISSN: 1881-8722,1348-8724
DOI: 10.2493/jspe.72.1391