Study Of Helmet Toughness In Rafting Fiberglass And Talk Reinforced Epoxy Composite Materials With Impact-Free Fall Method
نویسندگان
چکیده
Fiberglass is an alloy or a mixture of several chemicals (composite materials) that react and harden within certain time. This material has advantages over metal materials, including: lighter, easier to shape, cheaper. Based on the static tensile test, average strength three-layer composite reinforced with woven, random, talc glass fiber in three test specimens was 50.7970 MPa for composition 1, 52.7684 2, 2. 3 53.6094 MPa. bending impact 1 39.4805 MPa, 2 33.3044 53.8329 compositions, better because it higher value than other two compositions. From simulation results, stress top 7.05 front 5.77 side 4.66 And from results comparing free fall experimental above are 7.06 then difference 0.01 (0.14%), For 5.12 so 0.65 (11.26%), 4.04 we get 0.62 (13,3%). The amount energy absorbed by rafting helmet flat plate anvil 729.
منابع مشابه
Jürgen Manhart presents a clinical case using fiberglass reinforced composite endodontic posts Fiberglass reinforced composite endodontic posts
The prosthetic treatment of seriously damaged, endodonticallytreated teeth often require an endodontic post as an additional retention element for core build-up prior to crown restoration. In addition to metal-based posts and zirconia-based ceramic posts, fiber-reinforced composite posts have recently become a center of interest for dentists and science. In the past it was commonly accepted tha...
متن کاملMECHANICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS REINFORCED WITH MICRO AND NANO-SIZE Al2O3 FILLER PARTICLES
Abstract: Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the light- cured samples were assessed by three-point flexural strengt...
متن کاملmorphology, geochemistry, mineralogy, and micromorphology of soils of hormozgan province in relation to parent materials
ویژگی های زمین شیمیایی، کانی شناسی، و میکرومورفولوژیکی خاک ها و سنگ مادر مربوطه در منطقه بین بخش های جنوبی زاگرس و خلیج فارس تا دریای عمان(استان هرمزگان، ایران) مورد بررسی قرار گرفت. هدف های این مطالعه شناسایی تغییرات در خصوصیات فیزیکی، شیمیایی، و ترکیب کانی شناسی خاک، مطالعه میکرومورفولوژی و تکامل خاک، و بررسی توزیع عنصر خاک بر اساس هوازدگی، پروسه های خاک و زمین شناسی جهت توصیف اثرات مواد مادر...
15 صفحه اولFlexure Toughness of Polymer Fiber-reinforced Cementitious Materials
In this article, the toughening effect of polymer fibers in cementitious materials is analyzed through an energy method. When a crack front encounters a fiber array, additional fracture work is required to overcome the barrier effect. The influences of fibers, matrix, and crack length on the critical energy release rate are collectively described by a single system parameter.
متن کاملSolid particle erosion of Bagasse fiber reinforced epoxy composite
Experiments were carried out to study the effects of impingement angle and particle velocity on the solid particle erosion behavior of Bagasse Fiber Reinforced Polymer Composites (BFRPCs). The erosive wear is evaluated at different impingement angles from 30° to 90° at four different velocities of 48, 70, 82 and 109 m/s. The erodent used is silica sand with the size range 150 – 250 m of irregul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal Basic Science and Technology
سال: 2022
ISSN: ['2808-1498']
DOI: https://doi.org/10.35335/jbst.v11i1.1772