Structural Zones in Large Static Ingot. Forecasts for Continuously Cast Brass Ingot
نویسندگان
چکیده
منابع مشابه
Studying as - Cast Microstructure of the Cold Core (cc) Ingot
X. J. Zhang, C. J. Xu (Corresponding Author), Z. Y. Wang, J. Li, L. W. Zhang, X.D. Peng. School of Materials and Metallurgy, University of Science and Technology Liaoning, China In this study, the mechanism of the formation in structure of Cold Core ingot which is prepared by cold core casting method in lab is studied. The structure of the CC ingot is obtained by optical microscopy and macrosco...
متن کاملSimulation of Convection and Macrosegregation in a Large Steel Ingot
segregates. Although good agreement with experiments was MACROSEGREGATION in large steel ingots is one achieved, the model relied on many approximations (such of the most well-known and now classical problems in the as estimating the flow velocities). It should also be menfield of solidification and casting.[1] It arises from the relative tioned that many models have appeared in the literature ...
متن کاملDevelopment of Multi-wire Edm Slicing Method for Silicon Ingot
INSTRUCTIONS The diameter of silicon wafer becomes larger in order to increase the number of chips per one wafer. For such a larger diameter silicon ingot is mainly sliced by using multi-wire method, in which a long thin wire is used with slurry. In this method, several hundreds of wafers could be sliced at the same time. However there are still problems remained, such as large cracks, slurry t...
متن کاملSilicon Ingot Characterization by Quasi-Steady-State Photoconductance
The detailed knowledge of the distributions of carrier lifetimes, impurities and crystal defects in silicon ingots is key for understanding and improving wafer quality as well as solar cell processing steps. In this work, we have applied a quasi-steady-state photoconductance tester developed for the use on ingots to the measurement of lifetimes and dissolved iron concentrations along a p-type m...
متن کاملSOLIDIFICATION MODELING AND DENDRITE STRUCTURE ANALYSIS IN A HORIZONTAL CONTINUOUSLY CAST BRASS BILLET
Abstract: The horizontal continuous casting process has received a significant attention for near net shape casting of non ferrous metals and alloys. Numerical Simulation has been widely used for process design and optimization of continuous casting process. In the present study, a 3-dimensional heat flow model was developed to simulate the heat transfer and solidification in a horizontal b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2016
ISSN: 2299-2944
DOI: 10.1515/afe-2016-0067