Stress relaxation and elastic recovery behaviour of dual core stretchable ring spun yarn

Production of Core Spun Yarn with Ring & Siro Spinning System

A common problem in production of core–spun yarns on the Ring spinning frame is the slippage of the staple fibers as sheath fibers relative to the core. This effect is known as ‘strip-back’ or barberpole. This problem may lead to an incomplete core coverage and results in end–breaks in subsequent processing. In order to avoid this problem, in the present work, core spun yarns (acrylic sheath fi...

Investigating the RoCos Core Spun Compact Yarn Properties

Impact of Carding Parameters and Draw Frame Doubling on the Properties of Ring Spun Yarn

The impact of card cylinder speed, card production rate and draw frame doubling on cotton yarn quality parameters was investigated by using the BoxBehnken experimental design. It was found that yarn tenacity, elongation and hairiness increase by increasing the number of draw frame doubling up to a certain level and then decrease by further increase in doubling. Yarn unevenness increased by incr...

Redistribution of Fibers in the Structure of Hollow Ring Spun Yarn

Core yarn was spun by introducing a PVA multifilament as the core through the yarn forming zone of a ring spinning frame and viscose fibers as the sheath containing tracer fibers. The water soluble PVA multifilament was extracted from the yarn structure. Then internal structure and properties of the hollow ring yarn was assessed and compared with those of typical ring yarns. Also, two plain fab...

Modeling the Properties of Core-Compact Spun Yarn Using Artificial Neural Network