Strengthening Mechanisms in Metallic Materials
نویسندگان
چکیده
The mechanical properties of contemporary engineering alloys are approaching their natural limits [...]
منابع مشابه
Fracture mechanisms in bulk metallic glassy materials.
We find that the failure of bulk metallic glassy (BMG) materials follows three modes, i.e., shear fracture with a fracture plane significantly deviating from 45 degrees to the loading direction, normal tensile fracture with a fracture plane perpendicular to the loading direction, or distensile fracture in a break or splitting mode with a fracture plane parallel to the loading direction. The act...
متن کاملStrengthening Mechanisms in the Aged 2024 and 7075 Aluminium Alloys
Aluminum 2024 and 7075 alloys which are widely used in aerospace and marine applications were chosen to investigate their strengthening mechanisms. Using differential thermal analysis (DIA), metallography and tension tests, the best solutionizing conditions were determined to be 500±5°C and 2 hours for 2024 and 480?±5°C and 1 hour for 7075 alloy. Aging was performed in the range of 100 to 200°C...
متن کاملSustainable Non-Metallic Building Materials
Buildings are the largest energy consumers and greenhouse gases emitters, both in the developed and developing countries. In continental Europe, the energy use in buildings alone is responsible for up to 50% of carbon dioxide emission. Urgent changes are, therefore, required relating to energy saving, emissions control, production and application of materials, use of renewable resources, and to...
متن کاملAnalysis of precipitates in UFG metallic materials
In the present work, new possibilities of the X-ray diffraction for investigations of the 17 phase composition, size, shape and volume fraction of particles in ultrafine-grained (UFG) 18 martensitic steel and the Cu-Cr-Zr alloy have been demonstrated. For the first time, the method of 19 X-ray diffraction in the transmission mode was used to identify particles with a volume fraction of 20 less ...
متن کاملStrain Rate Effects in Metallic Cellular Materials
The high strain rate behavior of two cellular materials was investigated using a quasi-static loading stage and a Kolsky bar apparatus. The yield stress of these core materials under dynamic loading was found higher than in quasi-static loading. However, the plateau stress after yielding is not so sensitive to strain rate. For Aluminum foam materials, the deformation was more localized for quas...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2021
ISSN: ['2075-4701']
DOI: https://doi.org/10.3390/met11071134