Static Strength of Tubular T-joint with Reinforced Chord Under In-plane Bending Load
نویسندگان
چکیده
منابع مشابه
Hot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کاملStatic Strength Analysis of Elliptical Chord Tubular T-joints Using Fea
1.1 Offshore Structures: Offshore structures used for oil and gas extraction have the common function of providing a safe, dry working environment for the equipment and persons those operates the platform. Jacket supported drilling equipment as a guide for the piled foundations. The substructure referred to as the jacket is a three dimensional space frame made from large tubular steel members. ...
متن کاملShear Strength of Lightly Reinforced T-Beams in Negative Bending
Nine restrained T-beams were tested in a study of the negative moment region shear strength of lightly reinforced concrete T-beams. Variables included the longitudinal reinforcement ratio p, (0.47 percent and 0. 70 percent) and the nominal stirrup strength (0 to 84 psi [0 to 0.60 MPa]). The test results are compared with the shear provisions of "Building Code Requirements for Reinforced Concret...
متن کاملStatic Strength Analysis of Tubular T-Joints Using Ansys
A Finite element analysis has been done using ANSYS, to study the static strength of an offshore tubular T-joint. The strength of T-tubular joints with circular cross section tube chord with circular cross section tube brace is investigated. To determine the joint strength of these T-joint subjected to tension, compression, in -plane bending and out-of-plane bending loading cases have been carr...
متن کاملFinite Element Analysis of Elliptical Chord: Tubular T-Joints
The work presents the Finite element study of the effect of elliptical chords on the static and dynamic strength of tubular T-joints using ANSYS. Two different geometry configurations of the T-joints have been used, namely Type-1 and Type-2. An elastic analysis has been considered. The Static loading conditions used are: axial load, compressive load, In-plane bending (IPB) and Out-plane bending...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Ocean Engineering Journal
سال: 2011
ISSN: 1874-835X
DOI: 10.2174/1874835x01104010071