Static and fatigue behaviours of a bolted GFRP/steel double lap joint
نویسندگان
چکیده
منابع مشابه
Strength Prediction of Double-Lap Woven CFRP Bolted Joint Incorporating Material Softening
Strength prediction is discussed using a traction-separation damage model incorporating material softening for bolted joint that fails in bearing mode. The modelliug approach in the bolted double-lap joint of current work is a simplistic approach to predict the strength of bearing failures. This is clearly shown in bearing failure which occurred experimentally at higher W/d ratios. A simple met...
متن کاملStrength Prediction in CFRP Woven Laminate Bolted Double-Lap Joints under Quasi-static Loading using XFEM
The current paper is concerned with modelling damage and fracture in woven fabric composite double-lap bolted joints that fail by net-tension. A 3-D finite element model is used, which incorporates bolt clamp-up, to model a range of CFRP bolted joints, which were also tested experimentally. The effects of laminate lay-up, joint geometry, hole size and bolt clamp-up torque were considered. An Ex...
متن کاملEvaluation of Fatigue Life Reduction Factors at Bolt Hole in Double Lap Bolted Joints Using Volumetric Method
In this research, the influence of bolt preload on the fatigue strength of 2024-T3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. To do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 N-m and then fatigue tests were conducted under various cyclic axial load levels. In the numerical method, th...
متن کاملFinite element model updating of bolted lap joints implementing identification of joint affected region parameters
<span style="color: black; font-family: 'Times New Roman','serif'; font-size: 10pt; mso-fareast-font-family: 'Times New Roman'; mso-themecolor: text1; mso-ansi-lang...
متن کاملevaluation of fatigue life reduction factors at bolt hole in double lap bolted joints using volumetric method
in this research, the influence of bolt preload on the fatigue strength of 2024-t3 aluminium alloy double lap bolted joints has been studied experimentally and numerically. to do so, three sets of the specimens were prepared and each of them subjected to tightening torque of 1,2.5 and 5 n-m and then fatigue tests were conducted under various cyclic axial load levels. in the numerical method, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thin-Walled Structures
سال: 2021
ISSN: 0263-8231
DOI: 10.1016/j.tws.2020.107170