Spotting Solid Oxide Fuel Cell Degradation Effects by Electron Microscopy
نویسندگان
چکیده
منابع مشابه
An octane-fueled solid oxide fuel cell.
There are substantial barriers to the introduction of hydrogen fuel cells for transportation, including the high cost of fuel-cell systems, the current lack of a hydrogen infrastructure, and the relatively low fuel efficiency when using hydrogen produced from hydrocarbons. Here, we describe a solid oxide fuel cell that combines a catalyst layer with a conventional anode, allowing internal refor...
متن کاملIntegrating Multiple Solid Oxide Fuel Cell Modules
Abstract-According to SECA program guidelines, solid oxide fuel cells (SOFC) will be produced in the form of 3–10 kW modules for residential use. In addition to residential use, these modules can also be used in apartment buildings, hospitals, etc., where a higher power rating would be required. For example, a hospital might require a 250 kW power supply. To provide this power using the SOFC mo...
متن کاملHot-electron effects and oxide degradation in MOS structures studied with ballistic electron emission microscopy
The application of the STM-based technique of ballistic electron emission microscopy (BEEM) to the study of transport properties of SiO2 gate oxide layers is reviewed. Oxide degradation observed on a local scale of nanometer dimensions ranges from the filling of electron traps with low-kinetic-energy electrons injected just above the oxide barrier, to trap generation and filling triggered by el...
متن کاملExamination of Lung Parenchyma by Electron Microscopy
In this paper many of the principal structure of the Moral Lung were studied with the help of Electron Microscopy. Detailed description was given of Granular Pneumocytes, Membranous Pneumocytes, Macrophages, and Alveolar Capillaries. A discussion followed on the form and function of Granular Pneumocytes. Acknowledgements I am grateful to the Reza Shah Pahlavi Foundation for its generou...
متن کاملGlass coated compressible solid oxide fuel cell seals
With the growing footprint of solid oxide fuel cell stacks, there is a need to extend the operating range of compressible gaskets towards lower stress levels. This article describes a method to manufacture SOFC seals by coating a compressible sealing material (Thermiculite 866) with glass to obtain good sealing performance even at compression stresses as low as 0.1 MPa. Glass layer can be coate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2012
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927612008720