SORPTION EXTRACTION OF PLATINUM METALS FROM CHLORIDE – SULFATE AND SULFATE ACIDIC SOLUTIONS BY POLYACRYLONITRILE FIBERS FIBAN
نویسندگان
چکیده
منابع مشابه
Platinum Extraction Modeling from Used Catalyst by Iodine Solutions
Platinum extraction from spent reforming catalysts in iodine solutions under atmospheric pressure at different temperatures, acid concentration, and iodine spices concentration, catalyst particle size, and impeller agitation speed have been studied in our group. In this system, platinum is oxidized from spent catalyst with I3¯ that is formed ...
متن کاملDevelopment of Surface-Modified Polyacrylonitrile Fibers and Their Selective Sorption Behavior of Precious Metals
The purpose of this study was to design a powerful fibrous sorbent for recovering precious metals such as Pd(II) and Pt(IV), and moreover for identifying its selectivity toward Pd(II) or Pt(IV) from a binary metal solution. For the development of the sorbent, polyacrylonitrile (PAN) was selected as a model textile because its morphological property (i.e., thin fiber form) is suitable for fast a...
متن کاملELECTRODEPOSITION OF Ni-Fe ALLOYS FROM SULFATE, SULFATE-CHLORIDE AND CHLORIDE BATHS
In an attempt to control the film composition, factors affecting the composition of Ni-Fe alloy deposits and their crystal structure have been analyzed as a function of bath composition, cathode current density, bath pH, temperature and an addition of citric acid. antimony electrode revealed that the deposition potential of Fe coincides with the potential where the abrupt increase of pH was obs...
متن کاملPreparation of Highly Pure Vanadyl Sulfate from Sulfate Solutions Containing Impurities of Iron and Aluminum by Solvent Extraction Using EHEHPA
The preparation of highly pure vanadyl sulfate from sulfate solutions containing impurities of iron and aluminumwas investigated by solvent extraction with 2-ethylhexyl phosphoric acid mono-2-ethylhexyl ester (EHEHPA) and tri-n-butyl phosphate (TBP) as the phase modifier. The extraction and stripping conditions of vanadium (IV) and its separation from iron and aluminum were optimized. Under the...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
سال: 2019
ISSN: 2500-3070,0579-2991
DOI: 10.6060/ivkkt.20196211.5982