Soldering Aluminum.

Soldering of Aluminum Matrix Composites Sicp/a356 and Kovar Alloy

Article history: Received 28.3.2013 Received in revised form 26.4.2013 Accepted 29.4.2013 Aluminum matrix composites containing 55% SiC particle reinforcing phase/SiC reinforcement phase particle and Kovar alloy 4J29 were chosen as the base metals. After nickel plating on the surface of SiCp/Al, two kinds of materials were soldered together by using Zn-Cd-Ag-Cu as the filler metal and ZnCl2 as ...

Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition

Driven by the trends towards miniaturization in lead free electronic products, researchers are putting immense efforts to improve the properties and reliabilities of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC105 (Sn-1.0Ag-0.5Cu) because of economic reasons and improvement of impact resistance as compared to SAC305 (Sn-3.0Ag-0.5Cu. The present ...

Investigation on Mechanical Behavior Stir Soldering of Aluminum Foam Sandwich Panels

This paper introduces a novel soldering method for joining aluminum foams to aluminum plates. In this method, a rotating aluminum plate is soldered to the aluminum foam using zinc-based solder material. Rotation of the aluminum plate over the solder material drags the solder material and stirring it. Excellent tensile strength was obtained compared to those samples that are welded with the sold...

Investigation on Mechanical Behavior Stir Soldering of Aluminum Foam Sandwich Panels

This paper introduces a novel soldering method for joining aluminum foams to aluminum plates. In this method, a rotating aluminum plate is soldered to the aluminum foam using zinc-based solder material. Rotation of the aluminum plate over the solder material drags the solder material and stirring it. Excellent tensile strength was obtained compared to those samples that are welded with the sold...

Ersa wave soldering systems