Sol-Gel Derived Tertiary Bioactive Glass–Ceramic Nanorods Prepared via Hydrothermal Process and Their Composites with Poly(Vinylpyrrolidone-Co-Vinylsilane)
نویسندگان
چکیده
منابع مشابه
Dimethylamine Controlled Sol-Gel Process to Grow ZnO Nanorods
ZnO nanorods were prepared using dimethylamine (DMA) controlled Sol-Gel process. Dimethylamine was added as an additive to control the sol-gel process for growing ZnO nanorods. DMA would exhibit stabilizing effect, promote dissolution of precursor and control the rate of sol-gel reactions because of its basic nature and significant miscibility. The Structural and microstructural properties of t...
متن کاملOrganic Thin Film Transistors with Polyvinylpyrrolidone / Nickel Oxide Sol-Gel Derived Nanocomposite Insulator
Polyvinylpyrrolidone / Nickel oxide (PVP/NiO) dielectrics were fabricated with sol-gel method using 0.2 g of PVP at different working temperatures of 80, 150 and 200 ºC. Structural properties and surface morphology of the hybrid films were investigated by X- Ray diffraction (XRD) and Scanning Electron Microscope (SEM) respectively. Energy dispersive X-ray spec...
متن کاملTHERMAL, MECHANICAL, AND MOISTURE ABSORPTION PROPERTIES OF WOOD-TiO2 COMPOSITES PREPARED BY A SOL-GEL PROCESS
Wood-TiO2 (titania) composites were prepared by a sol-gel process, in which wood was impregnated with the precursor solutions prepared from tetrabutyl titanate (TBT), followed by a curing step. The surface morphology and moisture absorption behavior of the wood composites, as well as their thermal and mechanical performances, were examined. Environmental scanning electron microscopy (ESEM) anal...
متن کاملEu-Doped BaTiO3 Powder and Film from Sol-Gel Process with Polyvinylpyrrolidone Additive
Transparent BaTiO(3):Eu(3+) films were prepared via a sol-gel method and dip-coating technique, using barium acetate, titanium butoxide, and polyvinylpyrrolidone (PVP) as modifier viscosity. BaTiO(3):Eu(3+) films ~500 nm thick, crystallized after thermal treatment at 700 masculineC. The powders revealed spherical and rod shape morphology. The optical quality of films showed a predominant band a...
متن کاملPolyacrylate/silica nanocomposite materials prepared by sol–gel process
Polyacrylate/silica nanocomposite was prepared by sol–gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), c-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanoco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Functional Biomaterials
سال: 2020
ISSN: 2079-4983
DOI: 10.3390/jfb11020035