SLIP-LINE ANALYSIS FOR POWDER COMPRESSION

Worst-Case Analysis for On-Line Data Compression

A Slip-line Field for Ploughing during Orthogonal Cutting

Under normal machining conditions, the cutting forces are primarily due to the bulk shearing of the workpiece material in a narrow zone called the shear zone. However, under finishing conditions, when the uncut chip thickness is of the order of the cutting edge radius, a ploughing component of the forces becomes significant as compared to the shear forces. Predicting forces under these conditio...

three dimensional analysis of the extrusion process using the slip line field solution

many metal forming problems have been solved using the slip line field method but all of them have either been two-dimensional (plane strain or plain stress) or axisymmetric problems. in this paper a procedure has been proposed by which the slip line field solution to three dimensional problems of metal forming becomes possible. for this purpose the extrusion of shaped sections has been taken a...

Plane Strain Slip Line Theory for Anisotropic Rigid/plastic Materials

A SLIP line theory governing states of incipient plane flow at the yield point load is developed for anisotropic rigid/plastic materials which exhibit a reduced yield criterion, governing states of plane flow, that depends only on the deviatoric parts of the in-plane stress tensor. It is shown that every homogeneous, incompressible material which complies with the principle of maximum plastic w...

An Implementation of the Fundamental Parameters Approach for Analysis of X-ray Powder Diffraction Line Profiles

This work presents an open implementation of the Fundamental Parameters Approach (FPA) models for analysis of X-ray powder diffraction line profiles. The original literature describing these models was examined and code was developed to allow for their use within a Python based least squares refinement algorithm. The NIST interest in the FPA method is specific to its ability to account for the ...