“Slenderness effects in earthquake resisting frames” - A. L. Andrews
نویسندگان
چکیده
منابع مشابه
Innovations in Sustainable Earthquake Resisting Rocking Wall-Frames
This paper introduces a novel design concept for the development of efficient, sustainable Rocking-Wall Moment Frames (RWMFs) under seismic conditions. The proposed concepts lead to a novel structural configuration with provisions for Collapse Prevention (CP), Self-Centering (SC), reparability, performance control (PC), damage reduction, and energy based seismic analysis. It introduces the meri...
متن کاملRobustness Assessment of Steel Moment Resisting Frames
Nowadays, many buildings with steel Moment Resisting Frames (MRF) are built in seismic zones when seismic codes are at its early stages of development, and as such, these structures are often designed solely to resist lateral wind loads without providing an overall ductile mechanism. On the other hand, current seismic design criteria based on hierarchy of resistance allow enhancing the structur...
متن کاملEvaluating the effects of near-field earthquakes on the behavior of moment resisting frames
Following the 1994 Northridge and 1995 Kobe earthquakes, most of modern structures damaged seriously or devastated totally despite the seismic codes of these countries that had been expected to bear advanced criteria for seismic design of structures. After extensive research, the most probable reason of those destructions was attributed to special specifications of near-field earthquakes. In th...
متن کاملSeismic Retrofitting of Steel Frames with Buckling Restrained and Ordinary Concentrically Bracing Systems with Various Strain Hardening and Slenderness Ratios
The present study assesses the seismic performance of steel moment resisting frames (SMFs) retrofitted with different bracing systems. Two structural configurations were utilized: ordinary concentrically braces (OCBFs), buckling-restrained braces (BRBFs). A 7-story and 18-story steel perimeter SMFs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...
متن کاملA Technique for Seismic Rehabilitation of Damaged Steel Moment Resisting Frames
Moment resisting frames as one of the conventional lateral load resisting systems in buildings suffer from some limitations including code limitations on minimum span-to-depth ratio to ensure the formation of plastic hinges with adequate length at beam ends. According to seismic codes, in ordinary steel moment resisting frames the minimum span-to-depth ratios should be limited to 5 and in speci...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of the New Zealand Society for Earthquake Engineering
سال: 1978
ISSN: 2324-1543,1174-9857
DOI: 10.5459/bnzsee.11.1.71-75