Slag Foaming in Reaction between Molten Slag Containing Iron Oxide and Iron of High Carbon Concentration
نویسندگان
چکیده
منابع مشابه
Electrochemically Enhanced Reduction of Iron Oxide from Slag
An experimental study was performed to measure the rate of reduction of iron oxide from calcia-silica-alumina slag by carbon in iron, and to determine whether the reaction rate can be increased by electrochemical means. It is shown that the reaction rate depends on both the ferric-ferrous cation ratio, and on the total amount of iron in the slag. It was observed that ferric cations are reduced ...
متن کاملFabrication and Mechanical Properties of Iron Slag Matrix Composite Materials
–The objective of present work is to use this industrial waste i.e. Slag as particulate filler material to the epoxy matrix composites by molding technique with different weight fractions ( 0%, 5%,10%,15%, 20% ) to study the mechanical behaviour of reinforced polymer composite material. The change in weight is studied for Slag under different tests like, tensile, bending and impact for obtainin...
متن کاملThe effective parameters on thermal recovery and reduction of iron oxides in EAF slag
Steelmaking slag of Mobarakeh Steel Company (MSC) has a high iron content which makes it unsuitable for conventional slag recovery; as in cement industries. On the other hand, EAF slag in this company is almost free of zinc because of using more than 90 percent DRI in the charge. Therefore, removal or recovery of iron from the slag can be a suitable solution to slag recovery in this company. In...
متن کاملInfluence of Wettability and Reactivity on Refractory Degradation – Interactions of Molten Iron and Slags with Steelmaking Refractories at 1550°C
Refractories, materials that can withstand high temperatures, play an important role in the iron and steel sector which alone accounts for ~70% of total refractories pro‐ duced. In this chapter, detailed wettability and interfacial phenomena investiga‐ tions on alumina-carbon and zirconia-carbon refractories at steelmaking temperatures. The wettability between refractory substrates and molten i...
متن کاملCompressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1992
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.78.11_1682