SHEAR STRENGTH OF REINFORCED CONCRETE CIRCULAR SLABS

Punching shear strength of steel fibre reinforced concrete slabs

The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...

Shear strength model of reinforced concrete circular cross-section members

A shear capacity model of reinforced concrete members with circular cross section transversely reinforced with circular hoops has been developed. The proposed model is based on the truss analogy by adding a concrete contribution term to the capacity of the shear reinforcement. An additional deviatoric shear resisting th c curv pres nism ste ved und ctor mechanism of hoops present solely in memb...

Numerical Analysis of Punching Shear Failure of Reinforced Concrete Slabs

Nearly no load bearing behaviour of reinforced concrete members allows such varied interpretations and complex discussions as the shear behaviour. Especially the three-dimensional problem of the punching shear failure of reinforced concrete members is internationally discussed. Nevertheless up to now, there is no unified design approach or even an overall accepted design model. Especially for l...

Shear Area of Reinforced Concrete Circular Cross-section Members

The shear strength of reinforced concrete members without shear reinforcement is related to the shear stress carried by the concrete effective shear area. For rectangular sections the effective shear area represents the area corresponding to the effective depth. However, for circular sections this area is not as readily defined. Different empirical proposals have been suggested recently but no ...

Punching shear capacity of reinforced concrete slabs with headed shear studs