Shear response of carbon fiber composite octet-truss lattice structures

Hybrid carbon fiber composite lattice truss structures

Shear and bending performance of carbon fiber composite sandwich panels with pyramidal truss cores

Structural performance in direct (pure) shear and three-point bending was investigated for sandwich panels with a carbon fiber pyramidal truss core. Analytical estimates for sandwich panel strength for each loading condition were presented for possible competing failure modes. In the experimental part of the study, pyramidal truss cores were made using the hot press molding technique and then a...

Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures

A new method for fabricating carbon fiber composite pyramidal truss cores was developed based on the molding hot-press technique. In this method, all the continuous fibers of composite are aligned in the direction of struts and thus, the truss structure can fully exploit the intrinsic strength of the fiber reinforced composite. The microstructure and organizations of fibers of fabricated compos...

The compressive response of carbon fiber composite pyramidal truss sandwich cores

Pyramidal truss sandwich cores with relative densities 4q in the range 1–10% have been made from carbon fiber reinforced polymer laminates using a snap-fitting method. The measured quasi-static uniaxial compressive strength increased with increasing 4q from 1 to 11 MPa over the relative density range investigated here. A robust face-sheet/ truss joint design was developed to suppress truss– fac...

Sandwich-walled cylindrical shells with lightweight metallic lattice truss cores and carbon fiber-reinforced composite face sheets

We manufactured sandwich-walled cylindrical shells with aluminum pyramidal truss core of constant curvature employing an interlocking fabrication technique for the metallic core. The skins were made of carbon-fiber reinforced composites and co-cured with the metallic truss core. Thereafter, we carried out axial compression tests on some representative samples to investigate the failure modes of...