Self-propagating exothermic reaction assisted Cu clip bonding for effective high-power electronics packaging
نویسندگان
چکیده
For the high-power modules packaging, Cu clip bonding has gained growing interest to replace multiple wire-bonding for benefits of lower resistance and improved thermal performance, which is especially beneficial higher reliability. However, current interconnection materials processes cannot fully meet reliability requirements emerging integrated structure. Brazing alloys can serve in high-temperature conditions, since they have melting points above 450 °C. very limited brazing been applied electronics packaging processing temperature also high if needs be melted. It promising develop low-temperature technology at temperatures. In this study, incorporating with Cu-15Ag-5P alloy as material, self-propagating exothermic reaction (SPER) assist process, provides intense local heating achieve interconnects millisecond scale. The mechanism between substrate examined discussed. research findings promise an effective assembly route viable application packaging.
منابع مشابه
Parasitics in Power Electronics Packaging
In this paper we investigate the influence of 1st-level packaging components on the electromagnetic behaviour of power electronic modules. The main goal is to identify the critical layout paths and packaging components and to understand the mechanisms that affect the module performance. Several power electronics packaging technologies are compared on the basis of their electrical and electromag...
متن کاملHigh Temperature Electronics Packaging
Materials and processes are being developed for packaging of low and medium power, high temperature electronics (up to 500). Ceramic (Al2O3 and AlN) hermetic packages are being used. Die attach techniques based on patterned Au bumps, Au-Si and off-eutectic Au-Sn have been demonstrated. Au thermosonic wire bonding provides a monometallic interconnect system between the die and the package pads. ...
متن کاملReliability of Cu nanoparticle joint for high temperature power electronics
Power cycle reliability of Cu nanoparticle joint has been studied for high temperature operation of power devices. Al2O3 heater chips and Cu–65 wt% Mo baseplates were joined by Cu nanoparticles and Sn–0.7Cu and power cycle tests of 65/200 C and 65/250 C were carried out on the joints. The Cu nanoparticles were prepared by reducing Cu carbonate in ethylene glycol with dodecanoic acid + dodecyl a...
متن کاملDie Attach for High Temperature Electronics Packaging
AuSi, patterned Au and off-eutectic Sn-Au-Sn die attach materials and processes have been investigated for SiC die attach for high temperature applications. AuSi shear test results after 3000 hours of aging at 325C in air showed only a slight decrease in shear strength when assembled on Mo:Mn/Pd/Au metallized AlN. However, when assembled on Mo:Mn/Ni/Au metallized AlN, the die shear strength dec...
متن کاملPackaging Technologies for High Temperature Electronics and Sensors
This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500°C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microelectronics Reliability
سال: 2022
ISSN: ['0026-2714', '1872-941X']
DOI: https://doi.org/10.1016/j.microrel.2022.114688