SEISMIC RETROFIT OF EXISTING TELE COMMUNICATION TOWER USING BUCKLING RESTRAINED BRACE(Structures)
نویسندگان
چکیده
منابع مشابه
Using Composites in Seismic Retrofit Applications
This report was prepared to provide a comprehensive review of the state-of-the-art for using composite materials for seismic retrofit applications. The emphasis is on seismic retrofit of reinforced concrete columns. The report is presented in eleven chapters. Chapters 1–3 provide a basic introduction to composite materials, including discussions on the types of matrix and reinforcement material...
متن کاملAn Experimental Study on Seismic Performance of Steel Truss Coupling Beams with Buckling-restrained Brace
Through the pseudo-static test on the steel truss coupling beams with buckling-restrained brace, the bearing capacity, deformation capacity, hysteresis curve, skeleton curve, ductility, Energy Dissipation and stiffness degradation of such coupling beam are understood. The test results show that the steel truss coupling beams with buckling-restrained brace is characterized by bigger bearing capa...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Selection of Optimal Intensity Measure for Seismic Assessment of Steel Buckling Restrained Braced Frames under Near-Fault Ground Motions
Buckling restrained braces (BRBs) have a similar behavior under compression and tension loadings. Therefore, they can be applied as a favorable lateral load resisting system for structures. In the performance-based earthquake engineering (PBEE) framework, an intermediate variable called intensity measure (IM) links the seismic hazard analysis with the structural response analyses. An optimal IM...
متن کاملRisk Assessment and Retrofit of Existing Buildings
The structural risk assessment and evaluation process is broken into the steps of Develop knowledge of as-built conditions, Determine local response characteristics, Create mathematical model, Perform global analysis, Determine acceptability, and Select retrofit procedure/Classify per evaluation procedure and each step discussed. These steps, in general, are major topics of their own and only a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIJ Journal of Technology and Design
سال: 2005
ISSN: 1341-9463,1881-8188
DOI: 10.3130/aijt.11.179