SEISMIC RETROFIT BY USING DIAMOND TYPE EXTERNAL BRACED FRAME
نویسندگان
چکیده
منابع مشابه
External seismic pre-isolation retrofit design
This technical note outlines the design of an external seismic pre-isolation system proposed for use in LIGO Livingston. The goal is to reduce the effects of the site’s excess ground noise in the 1 3 Hz frequency band, allowing detector noise performance equivalent to that of the 4 km LIGO Hanford detector. The center histogram in Figure 8 shows the most troubling aspect of the excess noise qui...
متن کاملUsing Composites in Seismic Retrofit Applications
This report was prepared to provide a comprehensive review of the state-of-the-art for using composite materials for seismic retrofit applications. The emphasis is on seismic retrofit of reinforced concrete columns. The report is presented in eleven chapters. Chapters 1–3 provide a basic introduction to composite materials, including discussions on the types of matrix and reinforcement material...
متن کاملAssessment of Seismic Behavior of Eccentrically Braced Frame with Double Vertical Link (dv-ebf)
This paper is an experimental study on the behavior of vertical shear link in the single and double configurations. There have been three specimens selected for examining the effects of different details .The first specimen was an I section with no stiffener, while the second specimen composed of I section with stiffeners designed according to AISC 2005. Third specimens were composed of two I s...
متن کاملThe Effect of Frame Geometry on the Seismic Response of Self-Centering Concentrically- Braced Frames
Conventional concentrically-braced frame (CBF) systems have limited drift capacity before brace buckling and related damage leads to deterioration in strength and stiffness. Self-centering concentrically-braced frame (SC-CBF) systems have been developed to increase drift capacity prior to initiation of damage and minimize residual drift. SC-CBFs differ from conventional CBFs in that the SC-CBF ...
متن کاملEffect of column-foundation connection stiffness on seismic performance of rocking steel braced frame
Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIJ Journal of Technology and Design
سال: 2007
ISSN: 1881-8188,1341-9463
DOI: 10.3130/aijt.13.131