Seismic response of post-tension shear walls – Outrigger structure

نویسندگان

چکیده

This research was conducted by combining two structural systems: post-tensioned core walls and an outrigger in a 40-story building. A Vierendeel system applied to one stories, comparison between models performed determine the best locations. In addition, effect of at only 25 % building height investigated. Subsequently, positions were with bonded post-tension %. The results showed improvement lateral stiffness using outrigger, roof displacement enhanced approximately 42 14 Both systems worked together reduce 50

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

PERFORMANCE BASED OPTIMAL SEISMIC DESIGN OF RC SHEAR WALLS INCORPORATING SOIL–STRUCTURE INTERACTION USING CSS ALGORITHM

In this article optimal design of shear walls is performed under seismic loading. For practical aims, a database of special shear walls is created. Special shear walls are used for seismic design optimization employing the charged system search algorithm as an optimizer. Constraints consist of design and performance limitations. Nonlinear behavior of the shear wall is taken into account and per...

متن کامل

Response Modification Factor of Coupled Steel Shear Walls

The present research is concerned with the determination of ductility, over-strength and response modification factors of coupled steel shear wall frames. Three structural models with various numbers of stories, bay width and coupling beam height were analyzed using static pushover and incremental nonlinear dynamic analyses. The ductility, over-strength and response modification factors for the...

متن کامل

Effect of Debonding of Rebars on the Seismic Response of Boundary Elements of Lightly Reinforced Shear Walls

Rebar fracture in boundary elements of lightly reinforced shear walls in recent earthquake motivated research on the minimum longitudinal reinforcement applicable to shear walls. These researches lead to change in the ACI 318-19 requirement for minimum longitudinal reinforcement in boundary elements. New ACI 318 requirement increase minimum longitudinal reinforcement ratio for boundary elements...

متن کامل

Seismic Behavior of Intermediate Beams in Steel Plate Shear Walls

This paper presents some preliminary results of an ongoing research whose objective is to investigate the seismic behavior of intermediate beams (i.e., the beams other than those at the roof and foundation levels) in multi-story steel plate shear walls (SPSWs). Of primary interest is the determination of the strength level needed to avoid the formation of in-span plastic hinges, a relevant prac...

متن کامل

Seismic capacity rating and reliability assessment of wood shear walls

A modified version of the BRANZ procedure for lateral capacity rating of bracing walls is used to determine the sustainable lateral mass of a 910-mm wide ‘2x4’ wood shear wall. The key modifications involve: (1) the use of a multicriteria system identification method to determine a structural model that simultaneously fits test data from both cyclic testing and pseudo-dynamic testing; and (2) p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Gra?evinar

سال: 2022

ISSN: ['1849-1898', '1333-9095', '0350-2465']

DOI: https://doi.org/10.14256/jce.3418.2021