<scp>Fluorine‐phosphate</scp> copolymerization waterborne acrylic resin coating with enhanced anticorrosive performance
نویسندگان
چکیده
The modified waterborne acrylic resin was synthesized successfully by emulsion polymerization with octafluoropentyl methacrylate and phosphate functional monomer as monomers, showing an improved anti-corrosion performance of the coating. existence general distribution elements in were explored, mechanism disclosed. results show that modification monomers water resistance, corrosion resistance thermal stability resins. Compared unmodified resin, contact angle increased from 74.23° to 83.51°, initial decomposition temperature 264 305 °C. At same time, voltage increased, current density decreased, salt spray improved. This study provides a new way for preparation environmentally friendly, stable, corrosion-resistant
منابع مشابه
Mechanical and Anticorrosive Properties of Graphene/Epoxy Resin Composites Coating Prepared by in-Situ Method
The graphene nanosheets-based epoxy resin coating (0, 0.1, 0.4 and 0.7 wt %) was prepared by a situ-synthesis method. The effect of polyvinylpyrrolidone/reduced graphene oxide (PVP-rGO) on mechanical and thermal properties of epoxy resin coating was investigated using nanoindentation technique and thermogravimetric analysis, respectively. A significant enhancement (ca. 213% and 73 °C) in the Yo...
متن کاملAnticorrosive Performance of Polyester–melamine Coating Fortified with Zinc Ferrite Nanoparticles
In this study, nanoparticle zinc ferrites with different particle sizes were synthesized via sol-gel method using ferric nitrate and zinc nitrate. The obtained gel was dried and calcined at three different temperatures (i.e. 500, 600 and 800 °C) for 2 h. Adequate amounts of the as-synthesized nanoparticle samples were then added to the mixture of polyester resin and formaldehyde resin. The ...
متن کاملEffect of Zinc Phosphate on the Corrosion Behavior of Waterborne Acrylic Coating/Metal Interface
Waterborne coating has recently been paid much attention. However, it cannot be used widely due to its performance limitations. Under the specified conditions of the selected resin, selecting the function pigment is key to improving the anticorrosive properties of the coating. Zinc phosphate is an environmentally protective and efficient anticorrosion pigment. In this work, zinc phosphate was u...
متن کاملSkin Development during the Film Formation of Waterborne Acrylic Pressure-Sensitive Adhesives containing Tackifying Resin
Tackifying resins (TR) are often used to improve the adhesive properties of waterborne pressure-sensitive adhesives (PSAs) derived from latex dispersions. There is a large gap in the understanding of how, and to what extent, the film formation mechanism of PSAs is altered by the addition of TR. Herein, magnetic resonance profiling experiments show that the addition of TR to an acrylic latex cre...
متن کاملBonding of Acrylic Resin Teeth with Denture Base Resin
The debonding of acrylic resin teeth with the denture base resin has been related to several different factors of which contamination of the bonding surfaces with wax has been suggested as the major cause. The purpose of this study was to determine the efficient method of wax removal from denture teeth using hot water at different temperatures ranges. Acrylic rods were used as tooth analogues a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of polymer science
سال: 2023
ISSN: ['1542-9385', '0098-1273']
DOI: https://doi.org/10.1002/pol.20230108