Scour process caused by multiple subvertical non-crossing jets

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of local scour caused by submerged horizontal jets with Flow-3D numerical model

One of the most concerning issues for researchers is to predict the shape and dimensions of the scour pit nearhydraulic structures such as the base of bridges, weirs, valves and stilling basins due to both financial and humanhazards induced by destruction of the structure. As the scour issue has its own complexity in relation to themultiplicity of effecting factors on it, in this study therefor...

متن کامل

simulation of local scour caused by submerged horizontal jets with flow-3d numerical model

one of the most concerning issues for researchers is to predict the shape and dimensions of the scour pit nearhydraulic structures such as the base of bridges, weirs, valves and stilling basins due to both financial and humanhazards induced by destruction of the structure. as the scour issue has its own complexity in relation to themultiplicity of effecting factors on it, in this study therefor...

متن کامل

Prediction of Scour Profile Caused by Submerged Three-Dimensional Wall Jets

Series of laboratory tests were carried out to study the extent of scour caused by a three-dimensional wall jets exiting from a square cross-section nozzle and into a non-cohesive sand beds. Previous observations have indicated that the effect of the tail water depth was significant for densimetric Froude number greater than ten. However, the present results indicate that the cut off value coul...

متن کامل

Designing and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow

Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...

متن کامل

Scour Caused by Three-Dimensional Submerged Square Wall Jet: Sand Deposition in Scour Hole and Ridge

Laboratory tests were carried out to assess the local scour by three-dimensional wall jets from a square crosssection nozzle. To this end, three different tailwater depths were used and the jet expansion ratio was held greater than ten. Velocity measurements were conducted using a one component laser Doppler anemometer. The jet exit Reynolds number was maintained to 1x10 and this value can be c...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Water Science and Engineering

سال: 2017

ISSN: 1674-2370

DOI: 10.1016/j.wse.2017.03.010