منابع مشابه
Effect of bolting on roadway support in extremely weak rock
In mine roadway support operations, floor bolting not only played a role in floor heave control, but also in reinforcing roof and its two sides. Correspondingly, bolting of roof and two sides also played a part in floor heave control. To quantify the effect of such bolting, based on roadway support in extremely weak rock, three physical models were produced and tested in laboratory. Through com...
متن کاملSensitivity Analysis of Mechanical Parameters of Different Rock Layers to the Stability of Coal Roadway in Soft Rock Strata
According to the geological characteristics of Xinjiang Ili mine in western area of China, a physical model of interstratified strata composed of soft rock and hard coal seam was established. Selecting the tunnel position, deformation modulus, and strength parameters of each layer as influencing factors, the sensitivity coefficient of roadway deformation to each parameter was firstly analyzed b...
متن کاملStudy on the Vibration Response Characteristics of Broken Roof Rock in Coal Roadway
Received: December 18, 2015 Revised: September 29, 2016 Accepted: October 18, 2016 Abstract: Background: Aiming at the challenges in control and perdition of roof strata which caused by the complexity of coal mine roof, the force and vibration characteristics of drill bit have been analyzed considering the coupling vibration between drill bit and coal rock, and the characteristics of coupled vi...
متن کاملDeformation mechanisms in a coal mine roadway in extremely swelling soft rock
The problem of roadway support in swelling soft rock was one of the challenging problems during mining. For most geological conditions, combinations of two or more supporting approaches could meet the requirements of most roadways; however, in extremely swelling soft rock, combined approaches even could not control large deformations. The purpose of this work was to probe the roadway deformatio...
متن کاملOn the effect of grain size on rock behavior under cyclic loading by distinct element method
It is well-known that the mechanical behavior of rocks under cyclic loading is much different from static loading conditions. In most constructions, the load applied to structures is within dynamic ranges. That’s why a great deal of attention has been paid towards this field in order to identify the dynamic behavior of rocks in more details. Nevertheless, the nature of dynamic failure in rocks ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shigen-to-Sozai
سال: 1992
ISSN: 0916-1740,1880-6244
DOI: 10.2473/shigentosozai.108.635