Rheological Study of Partially Solidified Tin-Lead and Aluminium-Zinc Alloys for Stir-Casting

Continuous Roll Casting of Aluminium Alloys– Casting Parameters Analysis

The continuous roll casting process (CRC), consisting of continuous strip casting between rolls, is now well known. It was introduced by the SCAL Company (Pechiney Ugine Kuhlmann Group) 60 years ago 1 . The process consists of solidifying aluminum or aluminum alloys between the water-cooled rolls of a duo rolling mill. From the moment when solidification is completed to the moment when the stri...

Corrosion Resistance of Directionally Solidified Casting Zinc-Aluminum Matrix

The Strength of Friction Stir Welded and Friction Stir Processed Aluminium Alloys

Local strength of friction stir (FS) welds and FS processed aluminium alloys in heat treatable aluminium alloys is dominated by precipitation hardening. Strengthening due to stored dislocations is generally limited to 40MPa, and grain size strengthening is generally less than 10MPa. Local crystallographic texture can cause yield strength variation on the order of 5%. Published models for streng...

Macrosegregation in direct-chill casting of aluminium alloys

Modelling of Precipitation Hardening in Casting Aluminium Alloys

Precipitation hardening, because it involves the hardening of the material over a prolonged time, is also called age hardening, or ageing. By the appropriate heat treatment of precipitation hardening, the strength or hardness of some heat-treatable aluminium alloys can be enhanced by the formation of nano-meter sized second-phase precipitated particles within the original phase matrix. The fine...