Review tube oscilator and practical betterment in generator for HF welding steel tube
نویسندگان
چکیده
منابع مشابه
Analyzing the Behavior of Hybrid Steel System of Tube in Tube with Bracing and Belt Truss
Nowadays, due to the escalation in construction of high-rise structures, the need for selecting a proper resistant structural system against earthquake and wind has increased significantly. These systems should show an optimized use of materials and should be presented as a hard and efficient structure. A good example of a high efficient system in high-rise buildings can be indicated is, the tu...
متن کاملFabrication of Aluminum Foam-Filled Thin-Wall Steel Tube by Friction Welding and Its Compression Properties
Aluminum foam has received considerable attention in various fields and is expected to be used as an engineering material owing to its high energy absorption properties and light weight. To improve the mechanical properties of aluminum foam, combining it with dense tubes, such as aluminum foam-filled tubes, was considered necessary. In this study, an aluminum foam-filled steel tube, which consi...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملOverview of Steam Generator Tube-Inspection Technology
Degradation of steam generator (SG) tubing due to both mechanical and corrosion modes has resulted in extensive repairs and replacement of SGs around the world. The variety of degradation modes challenges the integrity of SG tubing and, therefore, the stations’ reliability. Inspection and monitoring aimed at timely detection and characterization of the degradation is a key element for ensuring ...
متن کاملDigital Radiographic Imaging Inspection System on The Tube to Tube sheet Welding Joints of Heat Exchanger
The tube to tube sheet welding joints of heat exchanger is the most critical joints. A special Nondestructive testing technology was proposed, which is based on the digital radiographic imaging automatic inspection system to the characteristics on the tube to tube sheet welding joints of heat exchanger. A new style Linear Diode Arrays as a device is used to receive ray, which will be fixed on a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Termotehnika
سال: 2016
ISSN: 0350-218X
DOI: 10.5937/termoteh1601051s