Review on Valve Stiction. Part I: From Modeling to Smart Diagnosis
نویسندگان
چکیده
منابع مشابه
Modelling Valve Stiction 1
The presence of nonlinearities, e.g., stiction, and deadband in a control valve limits the control loop performance. Stiction is the most commonly found valve problem in the process industry. In spite of many attempts to understand and model the stiction phenomena, there is a lack of a proper model, which can be understood and related directly to the practical situation as observed in real valv...
متن کاملQuantification of Valve Stiction
Oscillations in control loops lead to poor controller performance. Stiction in control valves is one of the major causes of such oscillations. Therefore, the correct diagnosis of stiction is important. There are several methods for detecting stiction, but quantification of stiction still remains a challenge. Two parameters are used to model the stiction phenomenon successfully, namely, deadband...
متن کاملA Review of Application of Signal Processing Techniques for Fault Diagnosis of Induction Motors – Part I
Abstract - Use of efficient signal processing tools (SPTs) to extract proper indices for fault detection in induction motors (IMs) is the essential part of any fault recognition procedure. The Part1 of the two parts paper focuses on Fourier-based techniques including fast Fourier transform and short time Fourier transform. In this paper, all utilized SPTs which have been employed for fault fete...
متن کاملDetection and Quantification of Control Valve Stiction
Stiction is one of the most common problems in the spring-diaphragm type control valves, which are widely used in the process industry. Although there have been many attempts to understand and detect stiction in control valves, none of the current methods can simultaneously detect and quantify stiction. There is thus a clear need in the process industry for a non-invasive method that can not on...
متن کاملEffect of Valve Port Gas Inertia on Valve Dynamics - Part I: Simulation of a Poppet Valve
T. J. Trella, U.S. Department of Transportation, Transportation Systems Center, Cambridge, Massachusetts 02142 and A theoretical model was developed of the nonlinear dynamic response of a reciprocating air compressor discharge valve system considering unsteady flow. It constitutes an extension of previous modeling procedures where the flow was considered in a quasi steady manner. The most simpl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processes
سال: 2015
ISSN: 2227-9717
DOI: 10.3390/pr3020422