Retentive Force of Pure Titanium Konus Telescope Crowns Fabricated Using CAD/CAD System
نویسندگان
چکیده
منابع مشابه
Retentive Force of Pure Titanium CAD / CAD System Konus [ I ] elescope Crowns Fabricated Using
The purpese of this study was to investigate the clinical application possibility of pure titanium kenus telescope erowns fabricated using a CAD/CAM system. For the CADICAM system, Dental Cadim (Advance Cn.) was used, For the material, exclusive pure titanium block for this system was used in this experiinent. Two types of experimental dies with different heights assumed the konus inner crown a...
متن کاملEvaluation of Mechanical Properties and Marginal Fit of Crowns Fabricated Using Commercially Pure Titanium and FUS-Invest
This study investigated the mechanical properties and single crown accuracy of the tailor-made Fourth University Stomatology investment (FUS-invest) for casting titanium. Background. Current investment for casting titanium is not optimal for obtaining high-quality castings, and the commercially available titanium investment is costly. Methods. Titanium specimens were cast using the tailor-made ...
متن کاملFit and dimensional changes of cast CP titanium crowns fabricated using sintered molds.
The present study was undertaken to evaluate the clinical applicability of cast CP titanium crowns fabricated with sintered molds. To this end, the dimensional changes and accuracy of fit of cast CP titanium crowns, manufactured under varying mold firing temperatures, were examined. Molds were fired at 7 temperatures. The outer height of the crown and outer width of the occlusal surface decreas...
متن کاملMagnetic force microscopy using fabricated cobalt-coated carbon nanotubes probes
Magnetic force microscope ( MFM ) is a powerful technique for mapping the magnetic force gradient above the sample surface. Herein, single-wall carbon nanotubes (SWCNT) were used to fabricate MFM probe by dielectrophoresis method which is a reproducible and cost-effective technique. The effect of induced voltage on the deposition manner of carbon nanotubes (CNT) on the atomic force microscope (...
متن کاملThe influence of mold temperature on the fit of cast crowns with commercially pure titanium.
Commercially pure titanium (CP Ti) has been widely applied to fabricate cast devices because of its favorable properties. However, the mold temperature recommended for the manufacture of casts has been considered relatively low, causing inadequate castability and poor marginal fit of cast crowns. This study evaluated and compared the influence of mold temperature (430 degrees C--as control, 550...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials Journal
سال: 2008
ISSN: 1881-1361,0287-4547
DOI: 10.4012/dmj.27.211